This is one of our most popular and versatile needles, suitable for any procedure. The innovative 'no-drip' needle tip reduces pigment pooling for improved visibility and increased precision. Choose a 0.25mm 1RL LT if you want a lesser stream of pigment to the skin for the most precise needle work, such as when creating an outline.

Configuration: Single needle round liner, depositing 1 pixel of ink at a time

Diameter: 0.25mm

Taper: Long - 6mm

Fits: Rotary machines

Procedure suitability: Brows, eyes, lips, areolas or any area that requires detail and precision

Best for: Creating precise lines, fine detailed effects, dusting and layering color

Skin type: Normal or thick skin. If you find you need to go over the skin many times to see color, switch to a larger configuration so as not to overwork the skin. Can be used on mature skin, but use light pressure to reduce trauma

Safe & sterile: Full membrane to prevent backflow and EO gas sterilized

This is one of our most popular and versatile needles, suitable for any procedure. The innovative 'no-drip' needle tip reduces pigment pooling for improved visibility and increased precision. Choose a 0.30mm 1RL LT if you want more pigment flow to the skin for precise needle work, such as when outlining or densely shading the brow or lip.

Configuration: Single needle round liner, depositing 1 pixel of ink at a time

Diameter: 0.30mm

Taper: Long - 6mm

Fits: Rotary machines

Procedure suitability: Brows, eyes, lips, areolas or any area that requires detail and precision

Best for: Creating precise lines, fine detailed effects, dusting and layering color

Skin type: Normal or thick skin. If you find you need to go over the skin many times to see color, switch to a larger configuration so as not to overwork the skin. Can be used on mature skin, but use light pressure to reduce trauma

Safe & sterile: Full membrane to prevent backflow and EO gas sterilized

This is one of our most popular and versatile needles, suitable for any procedure. The innovative 'no-drip' needle tip reduces pigment pooling for improved visibility and increased precision. Choose a 0.35mm 1RL LT if you want maximum pigment flow to the skin for precise needle work, such as when outlining or densely shading the brow or lip.

Configuration: Single needle round liner, depositing 1 pixel of ink at a time

Diameter: 0.35mm

Taper: Long - 6mm

Fits: Rotary machines

Procedure suitability: Brows, eyes, lips, areolas or any area that requires detail and precision

Best for: Creating precise lines, fine detailed effects, dusting and layering color

Skin type: Normal or thick skin. If you find you need to go over the skin many times to see color, switch to a larger configuration so as not to overwork the skin. Can be used on mature skin, but use light pressure to reduce trauma

Safe & sterile: Full membrane to prevent backflow and EO gas sterilized

This is one of our most popular and versatile needle sizes, suitable for any procedure - now with a medium taper. The innovative 'no-drip' needle tip reduces pigment pooling for improved visibility and increased precision, supported with a stainless steel tube for maximum stability. Choose a 0.25mm 1RL MT to deliver more pigment into the skin for more visible pixels and strokes.

Configuration: Single needle round liner, depositing 1 pixel of ink at a time

Diameter: 0.25mm

Taper: Medium - 3.5mm

Fits: Rotary machines

Procedure suitability: Brows, eyes, lips, areolas or any area that requires detail and precision

Best for: Creating precise lines, fine detailed effects, dusting and layering color

Skin type: Sensitive, normal, or thick skin. Brows, eyes, lips, areolas, or any area that requires detail and precision

Safe & sterile: Full membrane to prevent backflow and EO gas sterilized

This is one of our most popular and versatile needle sizes, suitable for any procedure - now with a medium taper. The innovative 'no-drip' needle tip reduces pigment pooling for improved visibility and increased precision, supported with a stainless steel tube for maximum stability. Choose a 0.30mm 1RL MT to deliver more pigment into the skin for more visible pixels and strokes.

Configuration: Single needle round liner, depositing 1 pixel of ink at a time

Diameter: 0.30mm

Taper: Medium - 3.5mm

Fits: Rotary machines

Procedure suitability: Brows, eyes, lips, areolas or any area that requires detail and precision

Best for: Creating precise lines, fine detailed effects, dusting and layering color

Skin type: Sensitive, normal, or thick skin. Brows, eyes, lips, areolas, or any area that requires detail and precision

Safe & sterile: Full membrane to prevent backflow and EO gas sterilized

Reduce your working time by choosing this slightly larger configuration, ideal for lining, shading and layering color. The innovative 'no-drip' needle tip reduces pigment pooling for improved visibility and increased precision. Choose a 0.25mm 3RL LT for easy skin entry when lining or shading larger surface areas on thicker skin types.

Configuration: 3 needles in a tight, circular composition, depositing 3 pixels of ink at a time

Diameter: 0.25mm

Taper: Long - 6mm

Fits: Rotary machines

Procedure suitability: Brows, eyes, lips, areolas or any area that requires detail and precision

Best for: Creating precise lines, fine detailed effects, dusting and layering color

Skin type: Normal or thick skin

Safe & sterile: Full membrane to prevent backflow and EO gas sterilized

Reduce your working time by choosing this slightly larger configuration, ideal for shading and layering color. The innovative 'no-drip' needle tip reduces pigment pooling for improved visibility and increased precision. Choose a 0.25mm 3RS LT if you want a more resistant skin entry and softer color, such as when shading sensitive, thinner, or mature skin.

Configuration: 3 needles in a looser cluster composition, depositing 3 pixels of ink at a time

Diameter: 0.25mm

Taper: Long - 6mm

Fits: Rotary machines

Procedure suitability: Brows, eyes, lips, areolas or any area that requires detail and precision

Best for: Soft gradient, shading, and layering color

Skin type: Normal, sensitive, mature, or thick skin requiring a soft and diffused color deposit

Safe & sterile: Full membrane to prevent backflow and EO gas sterilized

Reduce your working time by choosing this larger configuration, a high-coverage option ideal for shading and layering color. The innovative 'no-drip' needle tip reduces pigment pooling for improved visibility and increased precision. Choose a 0.25mm 5RS LT if you want a more resistant skin entry and softer color with a larger configuration, such as when shading sensitive, thinner, or mature skin.

Configuration: 5 needles in a looser cluster composition, depositing 5 pixels of ink at a time

Diameter: 0.25mm

Taper: Long - 6mm

Fits: Rotary machines

Procedure suitability: Brows, eyes, lips, areolas or any area that requires detail and precision

Best for: Shading and layering color

Skin type: Normal, sensitive, mature, or thick skin requiring a soft and diffused color deposit

Safe & sterile: Full membrane to prevent backflow and EO gas sterilized

Quickly create smooth gradient blends by choosing this larger configuration, a high-coverage option ideal for shading and layering color on larger surface areas. The innovative tapered fit needle casing increases stability and precision. This needle is great for bulk shading on larger surface areas with minimal wrinkles.

Configuration: 7 needles stacked in two rows with a curved profile, depositing 7 pixels of ink at a time

Diameter: 0.25mm

Taper: Long - 6mm

Fits: Rotary machines

Procedure suitability: Brows, lips, areolas, or any area that requires coverage on a larger surface area

Best for: Shading and layering color

Skin type: Normal or thick skin. Avoid using this on wrinkled or mature skin, as it may snag or cause bruising

Safe & sterile: Full membrane to prevent backflow and EO gas sterilized

Quickly create smooth gradient blends by choosing this larger configuration, a high-coverage option ideal for shading and layering color on larger surface areas. The innovative tapered fit needle casing increases stability and precision. This needle is great for bulk shading on larger surface areas with minimal wrinkles.

Configuration: 9 needles stacked in two rows with a curved profile, depositing 9 pixels of ink at a time

Diameter: 0.25mm

Taper: Long - 6mm

Fits: Rotary machines

Procedure suitability: Brows, lips, areolas, or any area that requires coverage on a larger surface area

Best for: Shading and layering color

Skin type: Normal or thick skin. Avoid using this on wrinkled or mature skin, as it may snag or cause bruising

Safe & sterile: Full membrane to prevent backflow and EO gas sterilized

For increased efficiency and maximum precision, choose the 5U Curved Flat needle for procedures that require linework or hair strokes, especially nano brows. The U-shaped profile allows for seamless skin entry, perfect for creating defined hair strokes, whether curved or straight. The needle diameter of 0.30mm, allows for excellent hair stroke and linework visibility. Additionally, the medium taper implants more pigment per touch, for a faster saturation.

The 5U Curved Flat needle can be used to create curvier hair strokes, as the smaller configuration allows for an easier turn. It’s also great for tight detailing and a good choice for clients with thinner brows.

Configuration: 5 needles in a flat, single row with curved edges

Diameter: 0.30mm

Taper: Medium - 3.5mm

Fits: Rotary machines

Procedure suitability: Brows, lips, eyeliner, or any area that requires linework

Best for: Linework/hair strokes

Skin type: All — from thin to thick, sensitive to non-sensitive

Safe & sterile: Full membrane to prevent backflow and EO gas sterilized

For increased efficiency and maximum precision, choose the 8U Curved Flat needle for treatments that require linework or hair strokes, especially nano brows. The U-shaped profile allows for seamless skin entry, perfect for creating defined hair strokes, whether curved or straight. The needle diameter of 0.30mm, allows for excellent hair stroke and linework visibility. Additionally, the medium taper implants more pigment per touch, for faster saturation.

The 8U Curved Flat needle can be used to create straighter hair strokes and is a good choice for clients with thicker brows. It's also great for covering more surface area when used for lining.

Configuration: 8 needles in a flat, single row with curved edges

Diameter: 0.30mm

Taper: Medium - 3.5mm

Fits: Rotary machines

Procedure suitability: Brows, lips, eyeliner, or any area that requires linework

Best for: Linework/hair strokes

Skin type: All — from thin to thick, sensitive to non-sensitive

Safe & sterile: Full membrane to prevent backflow and EO gas sterilized

Materials:

• No-drip tip to reduce pigment pooling
• 304 surgical grade stainless steel
• 0.25mm needle
• EO gas sterilized
• Disposable
• Full safety membrane

Compatibility:

Universal cartridge design is compatible with all rotary machines, not compatible with PMU digital machines/devices. See machine compatibility list here.

Documents:

Sterilization

Materials:

• No-drip tip to reduce pigment pooling
• 304 surgical grade stainless steel
• 0.30mm needle
• EO gas sterilized
• Disposable
• Full safety membrane

Compatibility:

Universal cartridge design is compatible with all rotary machines, not compatible with PMU digital machines/devices. See machine compatibility list here.

Documents:

Sterilization

Materials:

• No-drip tip to reduce pigment pooling
• 304 surgical grade stainless steel
• 0.35mm needle
• EO gas sterilized
• Disposable
• Full safety membrane

Compatibility:

Universal cartridge design is compatible with all rotary machines, not compatible with PMU digital machines/devices. See machine compatibility list here.

Documents:

Sterilization

Materials:

• No-drip tip to reduce pigment pooling
• 304 surgical grade stainless steel
• 0.25mm needle
• EO gas sterilized
• Disposable
• Full safety membrane

Compatibility:

Universal cartridge design is compatible with all rotary machines, not compatible with PMU digital machines/devices. See machine compatibility list here.

Documents:

Sterilization

Materials:

• No-drip tip to reduce pigment pooling
• 304 surgical grade stainless steel
• 0.30mm needle
• EO gas sterilized
• Disposable
• Full safety membrane

Compatibility:

Universal cartridge design is compatible with all rotary machines, not compatible with PMU digital machines/devices. See machine compatibility list here.

Documents:

Sterilization

Materials:

• No-drip tip to reduce pigment pooling
• 304 surgical grade stainless steel
• 0.25mm needle
• EO gas sterilized
• Disposable
• Full safety membrane

Compatibility:

Universal cartridge design is compatible with all rotary machines, not compatible with PMU digital machines/devices. See machine compatibility list here.

Documents:

Sterilization

Materials:

• No-drip tip to reduce pigment pooling
• 304 surgical grade stainless steel
• 0.25mm needle
• EO gas sterilized
• Disposable
• Full safety membrane

Compatibility:

Universal cartridge design is compatible with all rotary machines, not compatible with PMU digital machines/devices. See machine compatibility list here.

Documents:

Sterilization

Materials:

• No-drip tip to reduce pigment pooling
• 304 surgical grade stainless steel
• 0.25mm needle
• EO gas sterilized
• Disposable
• Full safety membrane

Compatibility:

Universal cartridge design is compatible with all rotary machines, not compatible with PMU digital machines/devices. See machine compatibility list here.

Documents:

Sterilization

Materials:

• Tapered tip to increase stability & precision
• 304 surgical grade stainless steel
• 0.25mm needle
• EO gas sterilized
• Disposable
• Full safety membrane

Compatibility:

Universal cartridge design is compatible with all rotary machines, not compatible with PMU digital machines/devices. See machine compatibility list here.

Documents:

Sterilization

Materials:

• Tapered tip to increase stability & precision
• 304 surgical grade stainless steel
• 0.25mm needle
• EO gas sterilized
• Disposable
• Full safety membrane

Compatibility:

Universal cartridge design is compatible with all rotary machines, not compatible with PMU digital machines/devices. See machine compatibility list here.

Documents:

Sterilization

Materials:

• Tapered tip to increase stability & precision
• 304 surgical grade stainless steel
• 0.30mm needle
• EO gas sterilized
• Disposable
• Full safety membrane

Compatibility:

Universal cartridge design is compatible with all rotary machines, not compatible with PMU digital machines/devices. See machine compatibility list here.

Documents:

Sterilization

Materials:

• Tapered tip to increase stability & precision
• 304 surgical grade stainless steel
• 0.30mm needle
• EO gas sterilized
• Disposable
• Full safety membrane

Compatibility:

Universal cartridge design is compatible with all rotary machines, not compatible with PMU digital machines/devices. See machine compatibility list here.

Documents:

Sterilization

I’m excited to share my new and improved PIXL Needle Cartridges with you! Artists can expect an effortless experience with this new, innovative NO-DRIP TIP to reduce pigment pooling, improve visibility, and increase precision. The improved finger ledge offers enhanced control and comfort to reduce hand fatigue. Made with a patented safety membrane to prevent backflow and optimize machine performance.

Top Tips:

• Needle selection is based on personal preference, skin condition and design demands.
• Consider which configuration will cause the least amount of trauma to your client's skin.
• To use: insert, twist and lock into place.
• For optimal pigment flow, adjust the needle hang on your machine to allow the needle to protrude by 2-3mm.
• If the needle is extended too far, it may not pick up enough color from the tip as the needle retracts.
• If the needle is not extended far enough, you will find it difficult to see the tip and may experience pigment pooling.
• Allow the needle to "draw up" ink into the tip of the cartridge by running the machine and holding the tip in place in your pigment cup.
• Do not to let the needle hit the bottom of the cup, as this may damage the needle tip. Use a pigment sponge to help.
• Work off the tip(s) of the needle without forcing it into the skin. If the needle is resistant to the skin, you may need to change to a smaller or tighter configuration to minimize trauma.
• Maintain a flat surface by gently stretching the skin in small areas at all times to maximize ink deposit and minimize skin trauma.
• Wipe the tip of the needle frequently to remove buildup of ink.
• During tattooing, clean the needle cartridge in sterile water to remove buildup and when changing colors.
• Dispose into a sharps container after use — never reuse a needle once you complete a procedure.

I’m excited to share my new and improved PIXL Needle Cartridges with you! Artists can expect an effortless experience with this new, innovative NO-DRIP TIP to reduce pigment pooling, improve visibility, and increase precision. The improved finger ledge offers enhanced control and comfort to reduce hand fatigue. Made with a patented safety membrane to prevent backflow and optimize machine performance.

Top Tips:

• Needle selection is based on personal preference, skin condition and design demands.
• Consider which configuration will cause the least amount of trauma to your client's skin.
• To use: insert, twist and lock into place.
• For optimal pigment flow, adjust the needle hang on your machine to allow the needle to protrude by 2-3mm.
• If the needle is extended too far, it may not pick up enough color from the tip as the needle retracts.
• If the needle is not extended far enough, you will find it difficult to see the tip and may experience pigment pooling.
• Allow the needle to "draw up" ink into the tip of the cartridge by running the machine and holding the tip in place in your pigment cup.
• Do not to let the needle hit the bottom of the cup, as this may damage the needle tip. Use a pigment sponge to help.
• Work off the tip(s) of the needle without forcing it into the skin. If the needle is resistant to the skin, you may need to change to a smaller or tighter configuration to minimize trauma.
• Maintain a flat surface by gently stretching the skin in small areas at all times to maximize ink deposit and minimize skin trauma.
• Wipe the tip of the needle frequently to remove buildup of ink.
• During tattooing, clean the needle cartridge in sterile water to remove buildup and when changing colors.
• Dispose into a sharps container after use — never reuse a needle once you complete a procedure.

I’m excited to share my new and improved PIXL Needle Cartridges with you! Artists can expect an effortless experience with this new, innovative NO-DRIP TIP to reduce pigment pooling, improve visibility, and increase precision. The improved finger ledge offers enhanced control and comfort to reduce hand fatigue. Made with a patented safety membrane to prevent backflow and optimize machine performance.

Top Tips:

• Needle selection is based on personal preference, skin condition and design demands.
• Consider which configuration will cause the least amount of trauma to your client's skin.
• To use: insert, twist and lock into place.
• For optimal pigment flow, adjust the needle hang on your machine to allow the needle to protrude by 2-3mm.
• If the needle is extended too far, it may not pick up enough color from the tip as the needle retracts.
• If the needle is not extended far enough, you will find it difficult to see the tip and may experience pigment pooling.
• Allow the needle to "draw up" ink into the tip of the cartridge by running the machine and holding the tip in place in your pigment cup.
• Do not to let the needle hit the bottom of the cup, as this may damage the needle tip. Use a pigment sponge to help.
• Work off the tip(s) of the needle without forcing it into the skin. If the needle is resistant to the skin, you may need to change to a smaller or tighter configuration to minimize trauma.
• Maintain a flat surface by gently stretching the skin in small areas at all times to maximize ink deposit and minimize skin trauma.
• Wipe the tip of the needle frequently to remove buildup of ink.
• During tattooing, clean the needle cartridge in sterile water to remove buildup and when changing colors.
• Dispose into a sharps container after use — never reuse a needle once you complete a procedure.

I’m excited to introduce the new 1RL, now in a medium taper, to our innovative line of PIXL Needle Cartridges. The new stainless steel tube provides maximum stability and support while the medium taper allows for a faster pigment deposit. Artists can expect the same effortless experience with the NO-DRIP TIP to reduce pigment pooling, improve visibility, and increase precision. Made with a patented safety membrane to prevent backflow and optimize machine performance.

Top Tips:

• Needle selection is based on personal preference, skin condition and design demands.
• Consider which configuration will cause the least amount of trauma to your client's skin.
• To use: insert, twist and lock into place.
• For optimal pigment flow, adjust the needle hang on your machine to allow the needle to protrude by 2-3mm.
• If the needle is extended too far, it may not pick up enough color from the tip as the needle retracts.
• If the needle is not extended far enough, you will find it difficult to see the tip and may experience pigment pooling.
• Allow the needle to "draw up" ink into the tip of the cartridge by running the machine and holding the tip in place in your pigment cup.
• Do not to let the needle hit the bottom of the cup, as this may damage the needle tip. Use a pigment sponge to help.
• Work off the tip(s) of the needle without forcing it into the skin. If the needle is resistant to the skin, you may need to change to a smaller or tighter configuration to minimize trauma.
• Maintain a flat surface by gently stretching the skin in small areas at all times to maximize ink deposit and minimize skin trauma.
• Wipe the tip of the needle frequently to remove buildup of ink.
• During tattooing, clean the needle cartridge in sterile water to remove buildup and when changing colors.
• Dispose into a sharps container after use — never reuse a needle once you complete a procedure.

I’m excited to introduce the new 1RL, now in a medium taper, to our innovative line of PIXL Needle Cartridges. The new stainless steel tube provides maximum stability and support while the medium taper allows for a faster pigment deposit. Artists can expect the same effortless experience with the NO-DRIP TIP to reduce pigment pooling, improve visibility, and increase precision. Made with a patented safety membrane to prevent backflow and optimize machine performance.

Top Tips:

• Needle selection is based on personal preference, skin condition and design demands.
• Consider which configuration will cause the least amount of trauma to your client's skin.
• To use: insert, twist and lock into place.
• For optimal pigment flow, adjust the needle hang on your machine to allow the needle to protrude by 2-3mm.
• If the needle is extended too far, it may not pick up enough color from the tip as the needle retracts.
• If the needle is not extended far enough, you will find it difficult to see the tip and may experience pigment pooling.
• Allow the needle to "draw up" ink into the tip of the cartridge by running the machine and holding the tip in place in your pigment cup.
• Do not to let the needle hit the bottom of the cup, as this may damage the needle tip. Use a pigment sponge to help.
• Work off the tip(s) of the needle without forcing it into the skin. If the needle is resistant to the skin, you may need to change to a smaller or tighter configuration to minimize trauma.
• Maintain a flat surface by gently stretching the skin in small areas at all times to maximize ink deposit and minimize skin trauma.
• Wipe the tip of the needle frequently to remove buildup of ink.
• During tattooing, clean the needle cartridge in sterile water to remove buildup and when changing colors.
• Dispose into a sharps container after use — never reuse a needle once you complete a procedure.

I’m excited to share my new and improved PIXL Needle Cartridges with you! Artists can expect an effortless experience with this new, innovative NO-DRIP TIP to reduce pigment pooling, improve visibility, and increase precision. The improved finger ledge offers enhanced control and comfort to reduce hand fatigue. Made with a patented safety membrane to prevent backflow and optimize machine performance.

Top Tips:

• Needle selection is based on personal preference, skin condition and design demands.
• Consider which configuration will cause the least amount of trauma to your client's skin.
• To use: insert, twist and lock into place.
• For optimal pigment flow, adjust the needle hang on your machine to allow the needle to protrude by 2-3mm.
• If the needle is extended too far, it may not pick up enough color from the tip as the needle retracts.
• If the needle is not extended far enough, you will find it difficult to see the tip and may experience pigment pooling.
• Allow the needle to "draw up" ink into the tip of the cartridge by running the machine and holding the tip in place in your pigment cup.
• Do not to let the needle hit the bottom of the cup, as this may damage the needle tip. Use a pigment sponge to help.
• Work off the tip(s) of the needle without forcing it into the skin. If the needle is resistant to the skin, you may need to change to a smaller or tighter configuration to minimize trauma.
• Maintain a flat surface by gently stretching the skin in small areas at all times to maximize ink deposit and minimize skin trauma.
• Wipe the tip of the needle frequently to remove buildup of ink.
• During tattooing, clean the needle cartridge in sterile water to remove buildup and when changing colors.
• Dispose into a sharps container after use — never reuse a needle once you complete a procedure.

I’m excited to share my new and improved PIXL Needle Cartridges with you! Artists can expect an effortless experience with this new, innovative NO-DRIP TIP to reduce pigment pooling, improve visibility, and increase precision. The improved finger ledge offers enhanced control and comfort to reduce hand fatigue. Made with a patented safety membrane to prevent backflow and optimize machine performance.

Top Tips:

• Needle selection is based on personal preference, skin condition and design demands.
• Consider which configuration will cause the least amount of trauma to your client's skin.
• To use: insert, twist and lock into place.
• For optimal pigment flow, adjust the needle hang on your machine to allow the needle to protrude by 2-3mm.
• If the needle is extended too far, it may not pick up enough color from the tip as the needle retracts.
• If the needle is not extended far enough, you will find it difficult to see the tip and may experience pigment pooling.
• Allow the needle to "draw up" ink into the tip of the cartridge by running the machine and holding the tip in place in your pigment cup.
• Do not to let the needle hit the bottom of the cup, as this may damage the needle tip. Use a pigment sponge to help.
• Work off the tip(s) of the needle without forcing it into the skin. If the needle is resistant to the skin, you may need to change to a smaller or tighter configuration to minimize trauma.
• Maintain a flat surface by gently stretching the skin in small areas at all times to maximize ink deposit and minimize skin trauma.
• Wipe the tip of the needle frequently to remove buildup of ink.
• During tattooing, clean the needle cartridge in sterile water to remove buildup and when changing colors.
• Dispose into a sharps container after use — never reuse a needle once you complete a procedure.

I’m excited to share my new and improved PIXL Needle Cartridges with you! Artists can expect an effortless experience with this new, innovative NO-DRIP TIP to reduce pigment pooling, improve visibility, and increase precision. The improved finger ledge offers enhanced control and comfort to reduce hand fatigue. Made with a patented safety membrane to prevent backflow and optimize machine performance.

Top Tips:

• Needle selection is based on personal preference, skin condition and design demands.
• Consider which configuration will cause the least amount of trauma to your client's skin.
• To use: insert, twist and lock into place.
• For optimal pigment flow, adjust the needle hang on your machine to allow the needle to protrude by 2-3mm.
• If the needle is extended too far, it may not pick up enough color from the tip as the needle retracts.
• If the needle is not extended far enough, you will find it difficult to see the tip and may experience pigment pooling.
• Allow the needle to "draw up" ink into the tip of the cartridge by running the machine and holding the tip in place in your pigment cup.
• Do not to let the needle hit the bottom of the cup, as this may damage the needle tip. Use a pigment sponge to help.
• Work off the tip(s) of the needle without forcing it into the skin. If the needle is resistant to the skin, you may need to change to a smaller or tighter configuration to minimize trauma.
• Maintain a flat surface by gently stretching the skin in small areas at all times to maximize ink deposit and minimize skin trauma.
• Wipe the tip of the needle frequently to remove buildup of ink.
• During tattooing, clean the needle cartridge in sterile water to remove buildup and when changing colors.
• Dispose into a sharps container after use — never reuse a needle once you complete a procedure.

I’m excited to share my new and improved PIXL Needle Cartridges with you! Artists can expect an effortless experience with the new tapered tip, to improve visibility, and increase stability & precision. The improved finger ledge offers enhanced control and comfort to reduce hand fatigue. Made with a patented safety membrane to prevent backflow and optimize machine performance.

Top Tips:

• Needle selection is based on personal preference, skin condition and design demands.
• Consider which configuration will cause the least amount of trauma to your client's skin.
• To use: insert, twist and lock into place.
• For optimal pigment flow, adjust the needle hang on your machine to allow the needle to protrude by 2-3mm.
• If the needle is extended too far, it may not pick up enough color from the tip as the needle retracts.
• If the needle is not extended far enough, you will find it difficult to see the tip and may experience pigment pooling.
• Allow the needle to "draw up" ink into the tip of the cartridge by running the machine and holding the tip in place in your pigment cup.
• Do not to let the needle hit the bottom of the cup, as this may damage the needle tip. Use a pigment sponge to help.
• Work off the tip(s) of the needle without forcing it into the skin. If the needle is resistant to the skin, you may need to change to a smaller or tighter configuration to minimize trauma.
• Maintain a flat surface by gently stretching the skin in small areas at all times to maximize ink deposit and minimize skin trauma.
• Wipe the tip of the needle frequently to remove buildup of ink.
• During tattooing, clean the needle cartridge in sterile water to remove buildup and when changing colors.
• Dispose into a sharps container after use — never reuse a needle once you complete a procedure.

I’m excited to share my new and improved PIXL Needle Cartridges with you! Artists can expect an effortless experience with the new tapered tip, to improve visibility, and increase stability & precision. The improved finger ledge offers enhanced control and comfort to reduce hand fatigue. Made with a patented safety membrane to prevent backflow and optimize machine performance.

Top Tips:

• Needle selection is based on personal preference, skin condition and design demands.
• Consider which configuration will cause the least amount of trauma to your client's skin.
• To use: insert, twist and lock into place.
• For optimal pigment flow, adjust the needle hang on your machine to allow the needle to protrude by 2-3mm.
• If the needle is extended too far, it may not pick up enough color from the tip as the needle retracts.
• If the needle is not extended far enough, you will find it difficult to see the tip and may experience pigment pooling.
• Allow the needle to "draw up" ink into the tip of the cartridge by running the machine and holding the tip in place in your pigment cup.
• Do not to let the needle hit the bottom of the cup, as this may damage the needle tip. Use a pigment sponge to help.
• Work off the tip(s) of the needle without forcing it into the skin. If the needle is resistant to the skin, you may need to change to a smaller or tighter configuration to minimize trauma.
• Maintain a flat surface by gently stretching the skin in small areas at all times to maximize ink deposit and minimize skin trauma.
• Wipe the tip of the needle frequently to remove buildup of ink.
• During tattooing, clean the needle cartridge in sterile water to remove buildup and when changing colors.
• Dispose into a sharps container after use — never reuse a needle once you complete a procedure.

I’m thrilled to introduce new curved flat configurations to our innovative line of PIXL Needle Cartridges! Create hair strokes and linework effortlessly — expect seamless saturation, decreased work time and reduced skin trauma. The tapered tip allows for increased stability and precision, while the soft finger ledge offers enhanced control and comfort to reduce hand fatigue. Made with a patented safety membrane to prevent backflow and optimize machine performance.

Top Tips:

• Needle selection is based on personal preference, skin condition and design demands.
• Consider which configuration will cause the least amount of trauma to your client's skin.
• To use: insert, twist and lock into place.
• For optimal pigment flow, adjust the needle hang on your machine to allow the needle to protrude by 2-3mm.
• If the needle is extended too far, it may not pick up enough color from the tip as the needle retracts.
• If the needle is not extended far enough, you will find it difficult to see the tip and may experience pigment pooling.
• Allow the needle to "draw up" ink into the tip of the cartridge by running the machine and holding the tip in place in your pigment cup.
• Do not to let the needle hit the bottom of the cup, as this may damage the needle tip. Use a pigment sponge to help.
• Work off the tip(s) of the needle without forcing it into the skin. If the needle is resistant to the skin, you may need to change to a smaller or tighter configuration to minimize trauma.
• Maintain a flat surface by gently stretching the skin in small areas at all times to maximize ink deposit and minimize skin trauma.
• Wipe the tip of the needle frequently to remove buildup of ink.
• During tattooing, clean the needle cartridge in sterile water to remove buildup and when changing colors.
• Dispose into a sharps container after use — never reuse a needle once you complete a procedure.

I’m thrilled to introduce new curved flat configurations to our innovative line of PIXL Needle Cartridges! Create hair strokes and linework effortlessly — expect seamless saturation, decreased work time and reduced skin trauma. The tapered tip allows for increased stability and precision, while the soft finger ledge offers enhanced control and comfort to reduce hand fatigue. Made with a patented safety membrane to prevent backflow and optimize machine performance.

Top Tips:

• Needle selection is based on personal preference, skin condition and design demands.
• Consider which configuration will cause the least amount of trauma to your client's skin.
• To use: insert, twist and lock into place.
• For optimal pigment flow, adjust the needle hang on your machine to allow the needle to protrude by 2-3mm.
• If the needle is extended too far, it may not pick up enough color from the tip as the needle retracts.
• If the needle is not extended far enough, you will find it difficult to see the tip and may experience pigment pooling.
• Allow the needle to "draw up" ink into the tip of the cartridge by running the machine and holding the tip in place in your pigment cup.
• Do not to let the needle hit the bottom of the cup, as this may damage the needle tip. Use a pigment sponge to help.
• Work off the tip(s) of the needle without forcing it into the skin. If the needle is resistant to the skin, you may need to change to a smaller or tighter configuration to minimize trauma.
• Maintain a flat surface by gently stretching the skin in small areas at all times to maximize ink deposit and minimize skin trauma.
• Wipe the tip of the needle frequently to remove buildup of ink.
• During tattooing, clean the needle cartridge in sterile water to remove buildup and when changing colors.
• Dispose into a sharps container after use — never reuse a needle once you complete a procedure.